000			02374nab a2200397 c 4500
001			vtls000675876
003			RU-ToGU
005			20230126115306.0
007			cr |
008			200221|2019 sz s a eng d
024	7		_a10.3390/met9010065 _2doi
035			_ato000675876
040			_aRU-ToGU _brus _cRU-ToGU
245	1	4	_aThe impact of particle reinforcement with Al2O3, TiB2, and TiC and severe plastic deformation treatment on the combination of strength and electrical conductivity of pure aluminum _cI. A. Zhukov, A. A. Kozulin, A. P. Khrustalyov [et al.]
504			_aБиблиогр.: 24 назв.
520	3		_aIt has been found that a high electrical conductivity of 63.1%, the International Annealed Copper Standard (IACS), and high mechanical properties are achieved by the initial aluminum alloy after undergoing four cycles of the severe plastic deformation (SPD) process. It has been found that when TiB2 particles are introduced into aluminum and the samples are subject to SPD, the mechanical characteristics of the aluminum alloy are improved. Microhardness (HV) increases from 329 to 665 MPa, yield strength (YS) increases from 38 to 103 MPa, and ultimate tensile strength (UTS) increases from 73 to 165 MPa while maintaining the initial electrical conductivity of cast aluminum without reinforcing particles (53.9–54.1% IACS).
653			_aалюминий
653			_aмеханические свойства
653			_aэлектропроводность
653			_aдеформационная обработка
653			_aпластическая деформация
655		4	_aстатьи в журналах _9745982
700	1		_aKozulin, Alexander A. _9104805
700	1		_aKhrustalyov, Anton P. _9104610
700	1		_aMatveev, Alexey E. _9501018
700	1		_aPlatov, Vladimir V. _9346007
700	1		_aVorozhtsov, Alexander B. _9104481
700	1		_aZhukova, Tatyana V. _9481077
700	1		_aPromakhov, Vladimir V. _9103753
700	1		_aZhukov, Ilya A. _9101411
773	0		_tMetals _d2019 _gVol. 9, № 1. P. 65 (1-10) _x2075-4701
852	4		_aRU-ToGU
856	4		_uhttp://vital.lib.tsu.ru/vital/access/manager/Repository/vtls:000675876
908			_aстатья
999			_c464097